Ciranova UV Horizontal & Vertical Exterior Wood Oil *Introductory Offer*

SKU: BLAEXWOODOIL750

Size: 0.75 litre
Price (Ex VAT):
Sale price£19.99

Shipping calculated at checkout. Local delivery rates are £18 - £40 (according to distance)

Description

Technical Data Sheet

Protects and decorates all horizontal and vertical exterior wood: patios, decking, pool surrounds, cladding, shutters, gates, screens, etc. The transparent and ultra-matte effect of Exterior Wood Oil provides a very trendy finish that accentuates the natural beauty of the wood.

  • Horizontal and vertical exterior wood
  • All wood types
  • Very natural effect
  • Non-film-forming: does not flake
  • High UV protection and water-beading effect
  • Non-slip

PRETREATMENT

The wood must be undamaged, clean, and dry, free of resin, grease stains, old protective layers (other than EXTERIOR WOOD OIL for regular maintenance), or old varnish, paint, glaze, or oil layers. Important: EXTERIOR WOOD OIL cannot be applied over other types of impregnating agents (saturators, oils). Strip off if necessary. Treat old, stained, or weathered wood with Ciranova EXTERIOR DEEPCLEANER. If necessary, apply an insecticide and fungicide as a preventative measure. IMPORTANT: After preparation, lightly sand all surfaces (80 grit), especially smooth wood or wood with a smooth, glossy surface, to open the pores and improve product absorption. Always thoroughly dust each surface before applying the product.

APPLICATION

Ready to use: do not dilute. Shake well before and during use. Apply the first coat in the direction of the wood grain with a spalter (wide brush) or roller, paying particular attention to grooves, joints, and ends (end grain). Allow to soak in for 20 to 30 minutes. Once the wood no longer appears damp, apply the second coat. After a few minutes, smooth with a dry spalter for a good result without excessive sheen or drip marks. These can indicate a surface film is forming (in which case, remove them quickly by lightly sanding the wood).
IMPORTANT: Before applying EXTERIOR WOOD OIL, ensure the wood is dry (at least 3 days of good warm weather before application) and that there is no chance of rain in the 24 hours following the second coat (do not apply to wood with a moisture content higher than 12%). Ambient temperature between 12°C and 28°C, relative humidity below 85%. For even longer-lasting protection, apply one coat of Ciranova EXTERIOR BARE WOOD PRIMER beforehand.

MAINTENANCE

Once the wood tone naturally lightens due to weather and UV radiation, sand the surface, remove dust, and clean it with Ciranova EXTERIOR MAINTENANCE CLEANER. Rinse thoroughly and let dry. First, pre-treat the damaged areas and then apply a new coat of Ciranova EXTERIOR WOOD OIL. If necessary (due to overdue maintenance), sand (80 grit) and use EXTERIOR DEEP CLEANER before applying EXTERIOR WOOD OIL as described above.


IMPORTANT: The appearance of the treated wood changes naturally due to weather and UV radiation: the tone lightens, and over time, water marks become less visible and the wood appears wet. This means it's time for maintenance.


Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed