18kg Stauf - MS Polymer Wood Flooring Adhesive

SKU: REW

Price (Ex VAT):
Sale price£74.99

Shipping calculated at checkout. Local delivery rates are £15 - £40 (according to distance)

Description

Product number
129130
Special features
elastically deformable
excess adhesive easy to remove
very well spreadable
particularly suitable for multiple layer wood flooring
very good thread formation
solvent-free, no hazard labels, water-free
Suitable for installation of
multiple layer wood flooring according to DIN EN 13489
Suitable subfloors
concrete C 25 / 30 according to DIN 1045 (non-skid surface)
calcium sulphate (flow) floors
mastic asphalt screed, only after priming with STAUF VEP 195
STAUF levelling compounds for wood flooring
chipboards (P4 to P7), OSB boards (OSB/2 to OSB/4)
cement floors
Suitable primers
STAUF VDP 130
STAUF VPU 155 S
STAUF VEP 195
STAUF WEP 180
Suitable levelling compounds
STAUF XP 20
STAUF GS
STAUF FZ
STAUF XP 10
STAUF RM
STAUF PU
STAUF SSP RAPID
Product properties
aging-resistant
suitable on subfloor heating systems
ready for use
no wood swelling
not sensitive to frost
very good thread formation
very low emission
fast setting
Color
beige
Required quantities per m²
1150g with STAUF notched trowel no.5
Open time
approx. 30 minutes at 20 °C
Accessibility
after approx. 24 hours
Grinding/polishing: after 24 hours
Room climate at work site
Minimum 18 °C, maximum 75% rel. humidity, preferably max. 65%
Storage requirements
dry
cool
Shelf-life
12 months
Giscode
RS 10
Emicode
EC1 plus
Available Packaging
18 kg plastic bucket

Examination of subfloor

Prior to processing, the subfloor must be checked according to the standard DIN 18356 or corresponding national standards. The subfloor shall be resistant to pressure and tension, free of cracks, must have sufficient surface strength, be permanently dry, level, clean and free of from contaminants that may prevent adhesion, sinter layers etc. In addition, porosity and grip of surface need to be checked. Also check moisture content and absorption of subfloors as well as temperature, air humidity and subfloor temperature.

Subfloor preparation

It must be ensured that the subfloor is ready for installation by performing proper subfloor preparation, floors must be clean, have sufficient surface strength, must be level, permanently dry and free of cracks. A mechanical pretreatment of the subfloor (sweeping, vacuuming, mechanical brushing, sanding, milling, shot blasting) must be performed depending on type and condition of subfloor. Cracks and joints, except expansion joints and other construction joints, shall be solidly closed with STAUF repair resin and floor brackets. Cavities and indentations can be filled with a non self-levelling STAUF levelling compound. If necessary, make sure subfloors are level, have sufficient absorptive capacity and grip by applying the appropriate STAUF levelling compound.

Processing

Apply adhesive to sub floor using the appropriate STAUF notched trowel, avoid adhesive pooling and excessive layer thickness by evenly raking the notched trowel over adhesive layer. Install wood flooring during specified open time, slide in and press down firmly. In particular with raw wood flooring, avoided pushing adhesive into joints. Adhesive in joints can impair subsequent surface treatment. Depending on the degree of setting, adhesive residues can be removed with the appropriate STAUF cleaners. Please test the effect of the cleaner on the finish of the wood flooring in an inconspicuous area or on a sample prior to applying the cleaner. Hardened adhesive residues can easily be removed mechanically, mostly residue-free. However, longer exposures on finished wood flooring should be avoided to prevent possible contouring. Best for use at 18 - 25 °C, substrate temperature between 15 - 23 °C (with underfloor heating 18 - 22 °C) and relative humidity below 65 %, until the adhesive has set. Consumption varies depending on the surface, the back of the parquet or flooring, and the trowel teeth used. Adhering multiple layer wood flooring using a notched trowel STAUF No. 5 (TKB B9), or alternatively, large-format multiple layer parquet using STAUF No. 14.


Accessibility

Load bearing capacity depends on room climate and applied quantities of adhesive.

Other information

Plasticizers contained in the adhesive can cause flow asphalts to partially dissolve and may affect the wood flooring finish systems, especially for wood flooring installed without tongue and groove technique. The adhesive hardens when reacting with moisture either in the form of air humidity, wood or substrate moisture. The higher the ambient temperature, the faster the adhesive sets. Setting time increases with thickness of the adhesive layer. Adhesives classified as elastic according to DIN EN 14293 and ISO 17178, have elastic properties once hardened. On account of this elasticity, only minimal tension is transferred from parquet to sub floor, but dimensional changes of the parquet elements are allowed for.

Limitation of liability

The above information corresponds to the current state of development and practical experience. However, it is only intended to assist you in selecting our products and should be considered non-binding in all cases, as we have no influence on installation and installation requirements vary from place to place. Claims based on this information are therefore excluded. The same applies to the commercial and technical advisory service provided free of charge and without obligation. We would like to point out that the customer and installer must carry out sufficient tests themselves to ensure that the product is suitable for the intended use. With the publication of this information, all previous technical information (information sheets, installation recommendations and other information intended for similar purposes) loses its validity.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed